[1]江平,梅文庆,杨大成,等.石油钻机驱动变频器控制系统研究[J].控制与信息技术,2012,(04):43-47.[doi:10.13889/j.issn.2095-3631.2012.04.001]
 JIANG Ping,MEI Wen-qing,YANG Da-cheng,et al.Research on the Control System of the Converter for Oil Drilling Drive[J].High Power Converter Technology,2012,(04):43-47.[doi:10.13889/j.issn.2095-3631.2012.04.001]
点击复制

石油钻机驱动变频器控制系统研究()
分享到:

《控制与信息技术》[ISSN:2095-3631/CN:43-1486/U]

卷:
期数:
2012年04期
页码:
43-47
栏目:
工业应用
出版日期:
2012-08-05

文章信息/Info

Title:
Research on the Control System of the Converter for Oil Drilling Drive
文章编号:
2095-3631(2012)04-0043-05
作者:
江平梅文庆杨大成周志宇甘韦韦陈涛
南车电气技术与材料工程研究院
Author(s):
JIANG Ping MEI Wen-qing YANG Da-cheng ZHOU Zhi-yu GAN Wei-wei CHEN Tao
(CSR Research of Electrical Technology & Material Engineering, Zhuzhou, Hunan 412001, China)
关键词:
石油钻变频器矢量控制主/ 从控制
Keywords:
oil drilling inverter vector control master-slave control
分类号:
TN773
DOI:
10.13889/j.issn.2095-3631.2012.04.001
文献标志码:
A
摘要:
从石油钻机传动系统负载特性出发,提出了ARM+DSP+FPGA 为主要控制系统的系统架构,对变频器主电路结构、异步电机矢量控制原理、间接矢量定向控制架构、主/ 从控制方案进行了分析说明。经过石油现场应用,证明了该控制系统具有良好的动态响应性能和控制性能。
Abstract:
Aiming to the load characteristic of oil drilling drive system, ARM+DSP+FPGA as the main control system of the control framework for oil inverter is proposed, and also the main circuit structure of converter, the principle of asynchronous motor vector control, the framework of indirect vector control-orientation and the master-slave control mode are analyzed and explained. The results of the oil field application show that the control system has a good dynamic response performance and control performance.

参考文献/References:

[1] 黄济荣. 电力牵引交流传动与控制[M] . 北京:机械工业出版社,1998.
[2 ] 尚敬,刘良杰,杨大成. 北京前门超级电容有轨电车交流传动控制系统[J]. 变流技术与电力牵引,2008(3):45- 48 .
 [3] 秦孝峰. 地铁车辆异步牵引电机矢量控制系统研究[J] .机车电传动,2011(6):54-57.
[4] 李华德. 交流调速控制系统[J]. 北京:电子工业出版社,2002.
[5] Blaschke Fe.The principle of field orientation as applied to the new transvektor closed-loop control system for rotating-field machines[J]. Siemens Review, 1972, 34:217-220.
 [6] Bose B K. Modern power electronics and AC drives[M]. Peking: China Machine Press, 2004.
 [7] Chrzan P J,Kurzynski P. A rotor time constant evaluation for vector controlled induction motor drives[J]. IEEE Trans. on Industrial Electronics,1992,39(5):463-465.
 [8] Moreira J C,Lipo T A. A New method for rotor time constant tuning in indirect field orientes control[J]. IEEE Trans. on Power Eletronics,1993,8(4):626-631.
 [9] Amler G, Sperr F, Hoffann F. Highly dynamic and speed sensorless control of traction drives[C]//EPE Conference. Toulouse,2003.
[10] 冯垛生,曾岳南. 无速度传感器矢量控制原理与实践[M]. 北京:机械工业出版社,2006.

相似文献/References:

[1]王 婷,梁志伟,刘海涛,等.基于PWM整流的商用中央空调变频器的研究与开发[J].控制与信息技术,2015,(01):56.[doi:10.13889/j.issn.2095-3631.2015.01.013]
 WANG Ting,LIANG Zhiwei,LIU Haitao,et al.Research and Development of Commercial Central Air-conditioning Inverter Based on PWM Rectifier[J].High Power Converter Technology,2015,(04):56.[doi:10.13889/j.issn.2095-3631.2015.01.013]
[2]许雄伟,郭锐,陈林,等.基于8400 StateLine 变频器的2 MW风力发电机组偏航系统设计[J].控制与信息技术,2014,(04):28.[doi:10.13889/j.issn.2095-3631.2014.04.007]
 XU Xiong-wei,GUO Rui,CHEN Lin,et al.Design of the Yaw System for 2 MW Wind Turbine Based on 8400 StateLine Converter[J].High Power Converter Technology,2014,(04):28.[doi:10.13889/j.issn.2095-3631.2014.04.007]
[3]江平,梅文庆,甘韦韦,等.大功率变频电源超速区自激损坏分析及系统设计[J].控制与信息技术,2014,(01):28.[doi:10.13889/j.issn.2095-3631.2014.01.007]
 JIANG Ping,MEI Wen-qing,GAN Wei-wei,et al.Analysis of Self-excited Damage and System Design for High-power Variable Frequency Power Supply in Overspeed Region[J].High Power Converter Technology,2014,(04):28.[doi:10.13889/j.issn.2095-3631.2014.01.007]
[4]丁杰,忻力,何海兴,等.二电平IGBT变频器载荷工况下损耗和温升计算程序的开发[J].控制与信息技术,2014,(01):1.[doi:10.13889/j.issn.2095-3631.2014.01.011]
 DING Jie,XIN Li,HE Hai-xing,et al.Program Development of Losses and Temperature Rise for Two-level IGBT Converter under Loading Conditions[J].High Power Converter Technology,2014,(04):1.[doi:10.13889/j.issn.2095-3631.2014.01.011]
[5]丁杰,唐玉兔,忻力.一种改进的二电平IGBT变频器损耗计算方法[J].控制与信息技术,2013,(04):18.[doi:10.13889/j.issn.2095-3631.2013.04.007]
 DING Jie,TANG Yu-tu,XIN Li.An Improved Method of Loss Calculation for Two-level IGBT Converters[J].High Power Converter Technology,2013,(04):18.[doi:10.13889/j.issn.2095-3631.2013.04.007]
[6]刘辉荣,付如愿,韩志成,等.石油钻机变频器控制系统网络冗余研究[J].控制与信息技术,2013,(02):27.[doi:10.13889/j.issn.2095-3631.2013.02.001]
 LIU Hui-rong,FU Ru-yuan,HAN Zhi-cheng,et al.Research of Redundant Network Control System Based on Oil Drilling Inverter[J].High Power Converter Technology,2013,(04):27.[doi:10.13889/j.issn.2095-3631.2013.02.001]
[7]黄敏,梅文庆,王婷,等.基于变频技术的石油钻井系统改造[J].控制与信息技术,2012,(02):55.[doi:10.13889/j.issn.2095-3631.2012.02.001]
 HUANG Min,MEI Wen-qing,WANG Ting,et al.Modification of the Oil Drilling System Based on Converter Technology[J].High Power Converter Technology,2012,(04):55.[doi:10.13889/j.issn.2095-3631.2012.02.001]
[8]张少云,刘斐,张铁军,等.一种变频器和工频电网之间同步切换的方法[J].控制与信息技术,2011,(03):51.[doi:10.13889/j.issn.2095-3631.2011.03.013]
[9]罗凌波,戴计生,尚敬.变频器二次组态开发调试软件的设计[J].控制与信息技术,2010,(05):12.[doi:10.13889/j.issn.2095-3631.2010.05.006]

备注/Memo

备注/Memo:
收稿日期:2012- 04- 26
作者简介:江平(1 9 8 3- ),男,工程师,从事逆变器控制系统研发工作。
更新日期/Last Update: 2017-03-29